1
/
of
2
DAVIES CRAIG
Davies Craig Ewp Lcd Controller Kit (12/24V) 8002
Davies Craig Ewp Lcd Controller Kit (12/24V) 8002
Regular price
$291.95 AUD
Regular price
Sale price
$291.95 AUD
Unit price
/
per
Tax included.
Couldn't load pickup availability
CRC F2 Multi-Purpose Contact Adhesive is a high performance general purpose contact adhesive. It is water resistant and flexible and its high bond strength makes it ideal for a wide range of uses. CRC F2 is easily applied highly versatile, durable and bonds instantly to most substrates.
Use a brush or roller. Apply a thin, even layer of adhesive to both surfaces; brushing in short, quick strokes. Between 10-20 minutes, the solvent should have evaporated and the adhesive should be ‘tacky’ enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are ‘sticky’ to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between the bond. Position components accurately, as when contact is made, the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure. An alternative method is heat reactivation to 80°C. In this case, care must be taken to ensure that all solvent has evaporated before heating.
SPECIFICATIONS
Flammability: Highly Flammable
Flash Point: < 0°C
Unit Depth: 25mm
Unit Height: 165mm
Unit Size: 75mL
Unit Width: 45mm
Use a brush or roller. Apply a thin, even layer of adhesive to both surfaces; brushing in short, quick strokes. Between 10-20 minutes, the solvent should have evaporated and the adhesive should be ‘tacky’ enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are ‘sticky’ to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between the bond. Position components accurately, as when contact is made, the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure. An alternative method is heat reactivation to 80°C. In this case, care must be taken to ensure that all solvent has evaporated before heating.
SPECIFICATIONS
Flammability: Highly Flammable
Flash Point: < 0°C
Unit Depth: 25mm
Unit Height: 165mm
Unit Size: 75mL
Unit Width: 45mm
Share
