1
/
of
2
GATES
Gates 4G-4Fjisx Megacrimp 7100-03305
Gates 4G-4Fjisx Megacrimp 7100-03305
Regular price
$17.95 AUD
Regular price
Sale price
$17.95 AUD
Unit price
/
per
Tax included.
Couldn't load pickup availability
BOSCH Wiper Blades Set 814S
Driver Side Wiper Blade: 625mm
Passenger Side Wiper Blade: 625mm
814S Wiper Blade Product No: 3 397 001 814
Bosch Conventional Wiper Blades Set utilises premium galvanised; full-metal frames made for maximum durability. This advanced frame design, along with Bosch patented Quick-Clip adaptor, maximises wiper lifespan and performance.
Coated with a special nano-graphite material; which repels water; increases service life and protects the wiper edge from wear. Bosch patented Quick-Clip system is also used to ensure a rapid installation.
These wipers are sold as a driver/passenger vehicle set.
How do you install Bosch Wiper Blades?
1. Lift the wiper arm away from the windscreen. Note that in some European cars you will need to keep the key turned in the ignition to release the wiper blades from the ‘hold position'.
2. Push down on the small tab on the underside of the wiper blade where the wiper meets the wiper blade arm (the metal part of the assembly).
3. Remove your worn wiper blade
4. Insert the new wiper blade into the existing wiper assembly claws. Lock the metal retaining clip at the end of the claw and ensure the new blade is sitting securely in place.
5. Cut any excess rubber from the end of the wiper claw.
6. Lower the wiper blade back to its resting position - job done!
Driver Side Wiper Blade: 625mm
Passenger Side Wiper Blade: 625mm
814S Wiper Blade Product No: 3 397 001 814
Bosch Conventional Wiper Blades Set utilises premium galvanised; full-metal frames made for maximum durability. This advanced frame design, along with Bosch patented Quick-Clip adaptor, maximises wiper lifespan and performance.
Coated with a special nano-graphite material; which repels water; increases service life and protects the wiper edge from wear. Bosch patented Quick-Clip system is also used to ensure a rapid installation.
These wipers are sold as a driver/passenger vehicle set.
How do you install Bosch Wiper Blades?
1. Lift the wiper arm away from the windscreen. Note that in some European cars you will need to keep the key turned in the ignition to release the wiper blades from the ‘hold position'.
2. Push down on the small tab on the underside of the wiper blade where the wiper meets the wiper blade arm (the metal part of the assembly).
3. Remove your worn wiper blade
4. Insert the new wiper blade into the existing wiper assembly claws. Lock the metal retaining clip at the end of the claw and ensure the new blade is sitting securely in place.
5. Cut any excess rubber from the end of the wiper claw.
6. Lower the wiper blade back to its resting position - job done!
Share
