1
/
of
2
ZFIR
ZF Friction (5Hp-19/Fl/Fla/4Hp-20) ZCL-59105
ZF Friction (5Hp-19/Fl/Fla/4Hp-20) ZCL-59105
Regular price
$31.95 AUD
Regular price
Sale price
$31.95 AUD
Unit price
/
per
Tax included.
Couldn't load pickup availability
Located in Australia, ACL has been providing an extensive replacement product range to a global aftermarket for over 70 years. Their reputation for robust metallurgy, quality, precision, innovation &, of course, performance shows through their products.
SPECIFICATIONS
-High Strength Overlay Plate With Reduced Thickness for Improved Fatigue Properties
-Hardened Steel Backs on All Rod Bearings to Improve Bearing Lining & Retention
-Increased Crush for Improved Bearing Retention
-Elimination of Flash Plating on Back of Bearings & Maximise Grip Between Bearings & Housing
-Increased Eccentricity to Compensate for Bore Distortion at High RPM & Assist in Formation of Hydrodynamic Oil Films
-3/4 Grooved Main Bearings to Optimise Bearing Load Carrying Surface Area & Oil Flow to Conrod Bearings
-Tight Consistent Wall Tolerances to Help Maintain Consistent Clearances
-Enlarged ID Chamfers on Bearing Edges Where Required to Accomodate Large Fillet Radius on Performance Crankshafts
-Half Type: Identical Halves
-Material: F780
-Min. Std Shaft Size: 53,988 mm / 2.1255 in
-Max Std Shaft Size: 54 mm / 2.1260 in
-Min. Std Tunnel Size: 57,683 mm / 2.2710 in
-Max Std Tunnel Size: 57,696 mm / 2.2715 in
-Max Wall at Crown: 1,818 mm / 0.0716 in
-Max Overall Length: 25,52 mm / 1.0047 in
SPECIFICATIONS
-High Strength Overlay Plate With Reduced Thickness for Improved Fatigue Properties
-Hardened Steel Backs on All Rod Bearings to Improve Bearing Lining & Retention
-Increased Crush for Improved Bearing Retention
-Elimination of Flash Plating on Back of Bearings & Maximise Grip Between Bearings & Housing
-Increased Eccentricity to Compensate for Bore Distortion at High RPM & Assist in Formation of Hydrodynamic Oil Films
-3/4 Grooved Main Bearings to Optimise Bearing Load Carrying Surface Area & Oil Flow to Conrod Bearings
-Tight Consistent Wall Tolerances to Help Maintain Consistent Clearances
-Enlarged ID Chamfers on Bearing Edges Where Required to Accomodate Large Fillet Radius on Performance Crankshafts
-Half Type: Identical Halves
-Material: F780
-Min. Std Shaft Size: 53,988 mm / 2.1255 in
-Max Std Shaft Size: 54 mm / 2.1260 in
-Min. Std Tunnel Size: 57,683 mm / 2.2710 in
-Max Std Tunnel Size: 57,696 mm / 2.2715 in
-Max Wall at Crown: 1,818 mm / 0.0716 in
-Max Overall Length: 25,52 mm / 1.0047 in
Share
